Skip to content
Stock checked on Amazon · 207 vacuum models in our database
Robot · Roborock

Roborock Qrevo Curv Vacuum Bags

The Roborock Qrevo Curv takes Roborock Qrevo / S8 MaxV Ultra / Saros bags. Here's the exact part number, the top-rated packs in stock today, and how to replace it.

By BolsasPro Team Updated on ⏱ 3 min read

✅ Quick answer

The Roborock Qrevo Curv uses Roborock Qrevo / S8 MaxV Ultra / Saros bags (genuine part number 8.02.0239).

Genuine part numbers
8.02.0239
Vacuum type
Robot with self-empty base
Typical material
Microfiber / synthetic
Capacity
2.7 liters
Production years
2024–2026

Fits all its variants: Q Revo Curv, Qrevo CurvX, Qrevo Curv 2 Flow.

🛈 If you buy through our links, Amazon pays us a small commission at no extra cost to you. That's how we keep the database running. How we choose.

📑 Contents +

⚡ Top picks for your Roborock Qrevo Curv

Stock checked on October 5, 2026
Top rated12 Pack Dust Bag for Roborock Qrevo S Pro/QV 3…
12 Pack Dust Bag for Roborock Qrevo S Pro/QV 3… 8.6 BolsasPro score: 8.6 out of 10 Check price
Best seller14 Pack Dust Bags Replacement for Roborock QV 35A/Qrevo…
14 Pack Dust Bags Replacement for Roborock QV 35A/Qrevo… 8.4 BolsasPro score: 8.4 out of 10 Check price
Best price per bag26 Pack Dust Bags for Roborock Qrevo S Pro, QV 35A,Qrevo…
26 Pack Dust Bags for Roborock Qrevo S Pro, QV 35A,Qrevo… 8.6 BolsasPro score: 8.6 out of 10 Check price

Roborock Qrevo Curv bags in stock

See more compatible bags on Amazon →

BolsasPro score: combines the average rating and the number of buyer reviews on Amazon.

How to confirm it's your model

Find the vacuum's rating plate: it's usually on the bottom or under the bag compartment lid. It shows the exact model. If it matches the Roborock Qrevo Curv or one of its variants (Q Revo Curv, Qrevo CurvX, Qrevo Curv 2 Flow), these bags will fit.

Tip: if you still have a used bag, check the cardboard collar. If it says 8.02.0239, you're on the right track.

How to change the bag on the Roborock Qrevo Curv

  1. Open the top lid of the self-empty base.
  2. Pull the used bag out by its handle: on most bases the seal closes automatically as you remove it.
  3. Slide the new bag into its guide until it clicks. Without a bag the lid won't close or the app shows a warning.
  4. Close the lid and run an empty cycle from the app to make sure there's no error.

How often should you change the bag?

Every 30–60 days with daily use: each bag handles dozens of empty cycles. With pets, more often. The app usually alerts you when it's full.

Equivalent part numbers

These part numbers all refer to the same bag. If a compatible pack lists any of them, it fits your vacuum:

  • 8.02.0239

Other vacuums that use the Roborock Qrevo / S8 MaxV Ultra / Saros bag

If you own any of these vacuums, you can buy exactly the same bags:

More Roborock models

Frequently asked questions

What bag does the Roborock Qrevo Curv take?+

The Roborock Qrevo Curv uses Roborock Qrevo / S8 MaxV Ultra / Saros bags. The genuine part number is 8.02.0239. Compatible bags that list that part number or the model in the title also fit.

Do compatible bags work in the Roborock Qrevo Curv?+

Yes. Good-quality compatible bags have the same cardboard collar and are usually multi-layer microfiber, which filters as well as or better than the original paper. Pick packs with lots of reviews that list part number 8.02.0239.

How often should you change the bag on the Roborock Qrevo Curv?+

Every 30–60 days with daily use: each bag handles dozens of empty cycles. With pets, more often. The app usually alerts you when it's full.

Can I empty and reuse the Roborock Qrevo Curv base bag?+

It's not recommended: these are disposable bags with an automatic seal. Emptying them damages the material and lets fine dust escape. A replacement pack works out cheap per bag.

⭐ Our pick

12 Pack Dust Bag for Roborock Qrevo S Pro/QV 3…

Check price