Skip to content
Stock checked on Amazon · 207 vacuum models in our database
Wet/dry · Kärcher

Kärcher WD2 Vacuum Bags

The Kärcher WD2 takes Kärcher KFI 222 (WD 2 / MV 2) bags. Here's the exact part number, the top-rated packs in stock today, and how to replace it.

By BolsasPro Team Updated on ⏱ 3 min read

✅ Quick answer

The Kärcher WD2 uses Kärcher KFI 222 (WD 2 / MV 2) bags (genuine part number 6.904-322.0).

Genuine part numbers
6.904-322.0KFI 222
Vacuum type
Wet/dry vac
Typical material
Paper
Capacity
12 liters
Production years
2010–2019

Fits all its variants: WD 2, WD2.200, WD 2.200, WD 2.210, WD 2.240, WD 2.250.

🛈 If you buy through our links, Amazon pays us a small commission at no extra cost to you. That's how we keep the database running. How we choose.

📑 Contents +

⚡ Top picks for your Kärcher WD2

Stock checked on October 5, 2026
Top ratedKärcher Wet and Dry Vacuum 5 x WD2 Paper Filter bags
Kärcher Wet and Dry Vacuum 5 x WD2 Paper Filter bags 9.0 BolsasPro score: 9.0 out of 10 Check price
Best price per bag10 Pack Vacuum Bags For Kärcher WD2 MV2 WD 2.200 WD…
10 Pack Vacuum Bags For Kärcher WD2 MV2 WD 2.200 WD… 7.3 BolsasPro score: 7.3 out of 10 Check price
Best seller10 Paper Vacuum Cleaner Bags Compatible With Karcher…
10 Paper Vacuum Cleaner Bags Compatible With Karcher… 7.3 BolsasPro score: 7.3 out of 10 Check price

Kärcher WD2 bags in stock

See more compatible bags on Amazon →

BolsasPro score: combines the average rating and the number of buyer reviews on Amazon.

How to confirm it's your model

Find the vacuum's rating plate: it's usually on the bottom or under the bag compartment lid. It shows the exact model. If it matches the Kärcher WD2 or one of its variants (WD 2, WD2.200, WD 2.200, WD 2.210, WD 2.240, WD 2.250), these bags will fit.

Tip: if you still have a used bag, check the cardboard collar. If it says 6.904-322.0, you're on the right track.

How to change the bag on the Kärcher WD2

  1. Unplug the vac and release the latches to lift off the motor head.
  2. Remove the used bag by pulling its collar off the inner intake port and throw it away sealed.
  3. Push the new bag's collar onto the tank's intake port until it's secure.
  4. Spread the bag across the bottom of the tank and reattach the motor head.
  5. For picking up liquids, always remove the bag (and on many models the paper filter too).

How often should you change the bag?

It depends on what you pick up. Fine construction dust (drywall, cement, sanding) clogs it in one or two sessions; cleaning out the garage or car it can last months. The clear sign is a loss of suction.

Equivalent part numbers

These part numbers all refer to the same bag. If a compatible pack lists any of them, it fits your vacuum:

  • 6.904-322.0
  • KFI 222

More Kärcher models

Frequently asked questions

What bag does the Kärcher WD2 take?+

The Kärcher WD2 uses Kärcher KFI 222 (WD 2 / MV 2) bags. The genuine part number is 6.904-322.0 (also listed as KFI 222). Compatible bags that list that part number or the model in the title also fit.

Do compatible bags work in the Kärcher WD2?+

Yes. Good-quality compatible bags have the same cardboard collar and are usually multi-layer microfiber, which filters as well as or better than the original paper. Pick packs with lots of reviews that list part number 6.904-322.0.

How often should you change the bag on the Kärcher WD2?+

It depends on what you pick up. Fine construction dust (drywall, cement, sanding) clogs it in one or two sessions; cleaning out the garage or car it can last months. The clear sign is a loss of suction.

Can I use the Kärcher WD2 without a bag?+

Yes, and you must remove it to pick up liquids. For dust and dry debris, always use a bag: it protects the filter, maintains suction, and keeps fine dust from blowing out the exhaust.

⭐ Our pick

Kärcher Wet and Dry Vacuum 5 x WD2 Paper Filter bags

Check price